Print this page
Tell a friend about this item
Motec M1 Series ECUs (Port Injection)
Advances in technology have increased the demands on a vehicle’s components, especially the ECU. This demand has reached the point where a single firmware to ECU configuration cannot meet the market’s ECU requirements (even with increased capacity and processor speed).
The M1 series was conceived by MoTeC to overcome this one-to-one, firmware to ECU limitation, by designing a system where operational efficiency, advanced features and flexibility are its primary objectives. At its core, the M1 solution combines flexible hardware with the ability to develop tailored packages using M1 Build (part of the M1 Development Kit), making it ideal for any application (however complex) and category management.
Basic Specification-
|
FEATURES |
M130 |
M150 |
M170 |
M190 |
|
Injector |
||||
|
|
8 |
12 |
8 |
12 |
|
|
|
|
|
12 |
|
Ignition |
||||
|
|
8 |
12 |
8 |
12 |
|
Auxiliary Outputs |
||||
|
|
2 |
6 |
2 |
6 |
|
|
6 |
10 |
6 |
10 |
|
Inputs |
||||
|
|
7 |
12 |
8 |
12 |
|
|
|
4 |
|
4 |
|
|
8 |
17 |
8 |
17 |
|
|
4 |
6 |
4 |
6 |
|
|
2 |
4 |
2 |
4 |
|
|
0 |
2 |
0 |
2 |
|
Data |
||||
|
|
1/0/0 |
3/1/1 |
1/0/0 |
3/1/1 |
|
|
120 |
250 |
250 |
250 |
|
Dimensions & Connectors |
||||
|
|
107x127x39 |
162x127x39 |
107x127x39 |
162x127x39 |
|
|
290g |
450g |
310g |
490g |
|
|
Plastic |
Plastic |
Autosport |
Autosport |
|
|
2 |
4 |
1 |
3 |
|
|
60 |
120 |
66 |
136 |
Peak & Hold Injector Outputs
