 |
|
|
|
|
|
|
 |
|
|
 |
 |
On some applications a ported shroud can be offered. A ported shroud is feature found on the inducer section of a compressor housing, this feature extends by a small margin the surge line of any given compressor wheel. It works buy allowing a small re-circulation effect within the compressor wheel at the point at which surge starts to occur, thereby extending the usable size of the compressor map. The downside is that the compressor loses a few efficiency points but nothing serious. While this feature is popular on large commercial vehicle turbochargers it can also be used for gasoline applications where wide maps are needed. It should be noted that if a turbocharger is seriously miss-matched to an engine to the extent that it will only run correctly with a ported shroud cover then re examination of the initial match should be done. |
|
|
|
|
| |
Step 4.
Choose a Compressor Cover from the options below or select "keep as standard".
|
| |
| |
|
| The BHP figures quoted are to be used as a guide only. Your specific requirements should be directed to the Technical Staff at Owen Developments either by our enquiry form or by phone between the hours of 9am-5pm weekdays only. You will need to provide details of engine type and capacity, maximum RPM, expectation and intended use and we will endeavour to help and advise where possible, as to the best turbocharger specification for your particular requirement. However it must be noted that Owen Developments are not liable for the condition and performance of the recipient vehicle, which in turn, may alter the recommended turbochargers performance and ability that is ultimately achieved. |
|
|
|
|
 |
 |
|
 |
Your cart is empty |
|
|
| *all prices shown in the cart exclude VAT |
 |
|
 |
|
 |
| |
 |
Step 1. Select Your Base Turbo |
| |
|
|
|
Step 2. Compressor Wheel |
| |
|
|
|
Step 3. Turbine Housing |
| |
|
|
|
Step 4. Compressor Cover |
| |
|
|
|
Step 5. Actuator Capsule |
| |
|
|
| Fitting/Adaptor Kits & Gaskets |
|
|
Step 6. Mounting Kits and Gaskets |
| |
|
|
| |
|
|
| |
|
|
 Please Note.
You can go back to any step and change your mind. Click on the item you want to change in the list above then make your new choice. |
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
Step 4. 
